Does anyone have a Beretta 92A1 full auto BB pistol?

[TBK]

I got mine a couple of weeks ago but have been too busy to fire it.  I should be able to test it out this weekend.  Does anyone else have one?  I bought it because it looks like another opportunity for big grins!

TBK

[camracer]

I have the GSG92 version sold by Cybergun that came out first in 2012. It is the exact same model as the Beretta, just different branding. Bought mine for $99.99 back then.

Fun to shoot. Feel pretty dead on to the real deal. You will get about 3 good mag dumps before you are out of CO2. I highly recommend you buy three or four extra mags and rotate mags after each mag dump so they can warm up a bit in succession.
Mine shot low and left, so I replaced my rear sight with an adjustable one. Had to JBWeld it in place.

[camracer]

This is what I want to do to mine:



http://www.thetruthaboutguns.com/2013/10/foghorn/gun-review-beretta-93r/

[Parellax]

A buddy of mine sells replica Umarex pistols. If you are shopping send fred589 a message.

[TBK]

I bought them because I have two stocks for the M93R and was going to see about fitting them up!  I also have an M93R airsoft that has been on order for a while.  Pyramyd says they will ship around the end of the month.  That has always been one of my favorite guns.  Probably not real practical, but I am sure it will be high on the grin factor.

I had the chance to buy one of the two in the US (transferable) in the mid 90s or so.  I am sure I don't want to know what that is worth now!

TBK

[TBK]

I had to check.  I took the grip off which exposes the pin holding in the fitting for the main attachment point.  I will have to make a new attachment fitting to drop it down just a tad to clear the grip.  Then add a couple of notches for the rest of the attachment locations and it should be ready to rock n roll.  The front of the trigger guard has less mass there than the M93R, but the foregrip won't be too much to add anyway.  Hmmm.  Add on a 100 round mag...

[Parellax]

They do look like a ton of fun. For the price it looks hard to pass up. I'm seeing if I can't do some horse trading to get my hands on one. In the promo video it looks dead on. A couple of people have been fooled with my Umarex P30 even though there is a seem dividing the slide.

[camracer]

I had the chance to buy one of the two in the US (transferable) in the mid 90s or so.  I am sure I don't want to know what that is worth now!

TBK

Holy shit!!

[camracer]

I had to check.  I took the grip off which exposes the pin holding in the fitting for the main attachment point.  I will have to make a new attachment fitting to drop it down just a tad to clear the grip.  Then add a couple of notches for the rest of the attachment locations and it should be ready to rock n roll.  The front of the trigger guard has less mass there than the M93R, but the foregrip won't be too much to add anyway.  Hmmm.  Add on a 100 round mag...

Do it! That would be a sight to see.

"...add on a 100 round mag." ...Heh! Interesting idea. I never thought about milling a high cap mag for these CO2 pistols before. Should be easy enough to mill.

[camracer]

http://www.evike.com/products/26895/

http://shop.ehobbyasia.com/ksc-folding-stock-for-m93r-ii-gbb.html#.VuL9W0DgLcs

http://www.airsoftgi.com/product_info.php?products_id=6617

http://shop.ehobbyasia.com/ksc-folding-foregrip-set-for-m93r-gbb-s7-1.html#.VuL9zUDgLcs

[camracer]

Since we are talking about the M93R, recognize this dressed up version from an iconic movie?

[TBK]

Robocop!  Realer than real!

I tried to buy one of those about a month ago but they are no longer made and the ones I have found are $350 or more.  I do have a bunch of pictures of the Robocop slide and it does not look too hard to make.  I want to do the M93r first.

[Parellax]

OK. I pre-ordered one of the 92-A1's forp Pyramid. I swear if I keep hanging out with you guys I'm going to be living in a very well protected cardboard box in the near future

[camracer]

Robocop!  Realer than real!

I tried to buy one of those about a month ago but they are no longer made and the ones I have found are $350 or more.  I do have a bunch of pictures of the Robocop slide and it does not look too hard to make.  I want to do the M93r first.

Heh! I was going to say it does not look too hard to make....

[camracer]

OK. I pre-ordered one of the 92-A1's forp Pyramid. I swear if I keep hanging out with you guys I'm going to be living in a very well protected cardboard box in the near future

Who needs a house anyway.