« previous next »
Pages: [1]

Author Topic: 1060 FPS  (Read 3957 times)

East Milford

  • Newbie
  • *
  • Posts: 34
    • View Profile
1060 FPS
« on: April 09, 2017, 08:48:19 PM »
Well i cronographed the BB after doing the "sealed breach mod," this involved welding a breach nut to the magazine to seal the air gap between the mag face and breach. The barrel now threads right to the bb exit hole. I cut the breach nut down to just a few threads so it slides into frame for easy removal . Before this mod i was getting 870ish fps on this particular build. So today i tested it out on a1500psi output Ninja reg.
The results were good. Some shots as high as 1070.
Logged

Westwind

  • Newbie
  • *
  • Posts: 18
    • View Profile
Re: 1060 FPS
« Reply #1 on: April 19, 2017, 05:09:48 PM »
Very cool you are a talented guy. That eliminates the need for
a latch plate with that mod. I won't be trying that one any time
Soon I'm not that good at welding.

Logged

East Milford

  • Newbie
  • *
  • Posts: 34
    • View Profile
Re: 1060 FPS
« Reply #2 on: April 23, 2017, 06:27:07 PM »
WW, i have extra mag heads with the welded breach nut on them. If you want to give it a go, let me know and i'll send you one.
Correct, mag latch and alignment mods are no longer as imperative. I do still like to use a magnet on a set screw to keep the BBs from rolling out of the barrel.
Logged
Pages: [1]
« previous next »