Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Parellax

Pages: [1] 2 3 ... 20
1
Drozd and Blackbird Discussion / Big Things Happening in our Corner
« on: December 13, 2018, 01:19:25 AM »
I'm still here doing backflips for this to work while being absurd. This has to work. Your support would be nice. Day #1

https://youtu.be/dMGhHoqr1lA

2
Other Airgun Discussions / Re: Other things I don't know where else to put
« on: November 30, 2018, 09:48:42 PM »
Nevertheless I'm never opening anything you send me again... Including ROCO files! BTW. I figured something out.

https://youtu.be/ivN0KT5fRoo

3
Other Airgun Discussions / 8K Sergey's Board
« on: November 20, 2018, 11:44:00 PM »
I've gotten it down pretty good now as far as reading the counter to capacity. Is 10K possible?

https://youtu.be/n0xufdE1QlE

I made this one today. Any tips for me making another vid where we can see the bb's? I had a flashlight shining on them next to the camera.

https://youtu.be/1PRJWGpTF_M

4
Other Airgun Discussions / Re: X-Ray Video of Airgun Firing
« on: November 20, 2018, 11:36:34 PM »
I'm just now seeing this. Funny. I recently have been prodding Sergey to help develop a nuclear powered bb gun. I know it sounds crazy at first, but it actually does grow on you. I wish you saw this when I posted it. ;D

5
Other Airgun Discussions / Re: Other things I don't know where else to put
« on: November 20, 2018, 11:30:52 PM »
I can only imagine what is in that file, and what happened to the poor bastard who downloaded it.

6
Drozd and Blackbird Discussion / Re: AR-15 Collapsible Stock Adapters Available Again
« on: July 23, 2018, 04:13:02 PM »
https://youtu.be/XxGE4irUGOs

7
Drozd and Blackbird Discussion / AR-15 Collapsible Stock Adapters Available Again
« on: July 10, 2018, 04:31:57 PM »
https://youtu.be/1AZ9EFyj7aY

8
Drozd and Blackbird Discussion / Ninja Pro V2 Regulators
« on: June 15, 2018, 04:54:12 PM »
I posted about these yesterday. I had Ninja custom build them for me/us. The benefit of the Ninja Pro V2 regulator besides the quality, and the fact they are made in the USA is the bonnet on them will rotate. Most of you know what I am talking about, but for those of you who do not these are perfect for direct connect because you can move the dial where you want it after you screw it into your adapter. Normally the Pro V2 only comes with a maximum output of 1100psi, but they built these for me/us at 1400psi. They will also build them at 1200psi, but I am stuck on 1400psi these days because 1600psi only gives me a 10fps gain. Also if you want more output pressure I have Ninja 1600psi regs on hand. They do not rotate, and need a special UFA these days because the valves on the X Pressure regulators are recessed. Both I have in stock are only for 4500 bottles. Message me if you want one. They are going on YouTube soon.

9
Drozd and Blackbird Discussion / Re: ASA Tapped Inlet Block
« on: June 14, 2018, 08:12:11 PM »
DUBB. A while back you know who we used to use for air started doing my customers wrong for air bottles, and regs. So now I am a Ninja dealer. When I ordered some 1600psi regs I found out they are making them with a recessed valve these days so they are not compatible with paintball. Here is my solution for direct connect junkies with the Internal valve, and pressure above 1400psi. It is a 2mm thick brass rod that has been secured with permanent Loctite into a hole drilled in the center of the adapter. The one on my rig is threaded so I can remove it. This one is not. It also works with an ASA adapter without flow restriction. I will refine this for a standard threaded pin later.

I mentioned 1400psi because Ninja will build the V2 up to 1400psi for us. This will allow us to have a high quality reg we can swivel into the desired position for direct connect that are paintball compatible. I have some ordered that will be here tomorrow. Above 1400psi in Ninja products we will need to move up to the Ninja X Pressure reg that does not swivel. I did a test the other day to find a gain of only 10fps from 1400psi to 1600psi.

10
Drozd and Blackbird Discussion / Shooting Star & 6K
« on: April 11, 2018, 08:53:53 PM »
https://youtu.be/NfxaFp8RXY8

11
Drozd and Blackbird Discussion / Re: ASA Tapped Inlet Block
« on: March 12, 2018, 09:09:36 PM »
The same thing is going on with the titanium valves. I really hope they get that one right. Of course I'd be more than happy to share my data with any American here to build the same thing better.

Ya'll threw up, and went home. I'm still at the party.

12
Drozd and Blackbird Discussion / Re: ASA Tapped Inlet Block
« on: March 12, 2018, 09:00:16 PM »
It does. You can see an ASA in the background of the first pic. It's about 1/4" longer than using a custom Foster adapter. Hands down best HPA adapter on the market. At first they were shit. The ones available now are spot on. I offer them in my builds.

13
Drozd and Blackbird Discussion / Re: ASA Tapped Inlet Block
« on: March 12, 2018, 08:40:27 PM »
Just what the doctor ordered. I took these pics today because the rest of my parts came in to do this. The first one is a 68/4500. The stock is locked in it's forward most position. The second pic is a 90/4500. The stock is locked in it's rear most position. I have the adapter in this one. It wouldn't work without the adapter, or low profile high output Ninja reg. BTW. I am a Ninja retailer now. This setup would look a lot better on a black Drozd.

14
Other Airgun Discussions / Re: $300> Scuba Compressors! Finally!
« on: March 12, 2018, 08:25:11 PM »
Funny you mention this. Mine will land tomorrow. After dicking around with my other one from Mrodair I am sure constant oil changes are the key to keeping these these inexpensive compressors working.

15
Other Airgun Discussions / Re: The Helium Effect Explained
« on: March 12, 2018, 08:22:18 PM »
Makes a lot of sense. The closer you get to the SB it gets exponentially more difficult. It's like you can knock on that door all you want using air the honest way. My fastest shot has been 1060 something.

Pages: [1] 2 3 ... 20