1
Drozd and Blackbird Discussion / Re: AR Collapsible Stock & Direct Air
« on: August 02, 2016, 08:23:00 PM »I have a 48CU tank behind mine with the stock pulled out to a usable length, I couldn't imagine a larger one.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
I have a 48CU tank behind mine with the stock pulled out to a usable length, I couldn't imagine a larger one.
2
Other Airgun Discussions / Re: Pellets
« on: March 18, 2016, 11:10:07 AM »I agree with Cam on the "out of round" statement, from what I can see, those look totally unusable in a BB gun!?! Would be interested on how many you find that are truly round enough to use! I was hoping to use the .22 size but if they are all mungled up (is that a word?) I may be out of luck...
3
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: March 17, 2016, 04:15:50 PM »We had to edit it to a "G" rating,, for those with virgin ears!?!
4
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: March 16, 2016, 10:45:52 AM »Couldn't agree more! Takes a ton of time, dedication and pushing through failure, but an awesome end result is more than worth the frustrating times and keeps the fun in what we do!
5
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: February 03, 2016, 06:19:51 PM »Yea, my bad, I knew solder wouldn't hold long but figured I would get you one fast for testing. The rest will be pressed, epoxied and turned! Parellax proof for sure!
6
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: February 02, 2016, 10:58:35 AM »I was thinking about using three instead of four magnets and leaving the very end non-magnetized. That would keep the spring from being pulled so much and rubbing and lord knows, I don't want my "shaft" to have too much pull!?! I think I will rip apart the ones I have waiting for the lathe and re-do them!
7
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: February 01, 2016, 07:32:08 PM »So I'm curious as to how reliable 2k is now?? Have we at least made it that far in reliable feed speed?? If so, I will order a few of those motors!
8
Drozd and Blackbird Discussion / Re: Drozd, Blackbird, and Hummingbird Magazines
« on: February 01, 2016, 04:12:21 PM »Hey Camracer, try "Design Spark Mechanical" Cad software, it is very intuitive and easy to learn and a free program. I am using this one mainly now and I am proficient at AutoCAD and have that software too. Sketchup is another free program but a fairly large learning curve, but still not as bad as AutoCAD!!!
9
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: February 01, 2016, 04:08:11 PM »I have 5 more cut, stuffed and glued, just need to put them on the lathe and cut them down, should have them shipped to Parellax by mid week! Nice we don't need the agitator with these, that thing is annoying!! Will make a much quieter experience, easier to sneak up on those waskly wabbits!
10
Drozd and Blackbird Discussion / Re: Magnetic Blackbird Auger Shaft
« on: January 26, 2016, 12:14:34 PM »Thanks for the kind words! I hope it functions as we hope! If it can keep the BB's from bouncing back out at high rpm's and not bind things up, we should be able to reliably increase the feed rate!
11
Buy, Sell, Trade / Re: MT Valves for Sale...
« on: November 24, 2015, 02:04:58 PM »
Thanks for the valves 
A few more mods. and maybe we can break the sound barrier with a BB!!
A few more mods. and maybe we can break the sound barrier with a BB!!
Pages: [1]