Air Machinegun Forum

General Air Machinegun Discussion Category => Drozd and Blackbird Discussion => Topic started by: Parellax on April 04, 2016, 03:47:24 PM

Title: Sergey's New Board
Post by: Parellax on April 04, 2016, 03:47:24 PM

Here is a quick demo of Sergey's new board.

https://www.youtube.com/watch?v=JsPCqzFjNu4 (https://www.youtube.com/watch?v=JsPCqzFjNu4)

Title: Re: Sergey's New Board
Post by: camracer on April 05, 2016, 10:46:11 AM

Heh! Too bad you didn't do that on April 1st!

Very cool. Nice to see Sergey's new production model laser sign? How large can you make the characters at a given distance?

Title: Re: Sergey's New Board
Post by: Parellax on April 05, 2016, 03:38:15 PM

I will have to do the math, but I can easily light up a building that is about 100' X 20' from 200'. I have run drink special adds with it for a friend of mine who owns a bar. The best part is I get free beer.

In this video I ran the add on a theater from a hotel window for four hours before I was politely asked to knock it off at 2 am.

https://www.youtube.com/watch?v=rKvtLsRxNIg (https://www.youtube.com/watch?v=rKvtLsRxNIg)

Title: Re: Sergey's New Board
Post by: Parellax on April 06, 2016, 05:41:15 PM

All kidding aside my intermediate boards arrived today. These boards are designed to handle a full 24 V. They are made for solenoid operated guns like the Drozd family. They are single shot, and one setting for full auto. The two I have are set for 3, and 4K. They have a pulse setting of 4 to 12 milliseconds. I am retiring the prototype 4K board in my B so while I wait on yet another board I will put one of these in it for a demo.

Title: Re: Sergey's New Board
Post by: Parellax on April 08, 2016, 03:32:24 PM

Here is a video of the Sergey's Intermediate Board. Maybe it will help this threads title to be more appropriate for the forum. :)
https://www.youtube.com/watch?v=HcO02Pg0MMU (https://www.youtube.com/watch?v=HcO02Pg0MMU)

Title: Re: Sergey's New Board
Post by: Sergey on May 05, 2016, 03:52:45 PM

Hi. I'm a new member here and I feel a little bit shy :)

Title: Re: Sergey's New Board
Post by: TBK on May 05, 2016, 05:17:27 PM

Quote from: Sergey on May 05, 2016, 03:52:45 PM

Hi. I'm a new member here and I feel a little bit shy :)

That won't last!  Welcome to the forum.

Title: Re: Sergey's New Board
Post by: Parellax on May 05, 2016, 06:09:12 PM

You probably know everyone here. If not they know you. It's good to have you.

Title: Re: Sergey's New Board
Post by: TBK on May 05, 2016, 06:44:35 PM

I have the older version of that at 900 rpm, and some newer ones at 2000 rpm.  I don't remember the voltage rating on each off the top of my head, though.  I like them for being so compact.  They fit in small places so you can have flexibility in the platform you put it in and how you configure your gun.

TBK

Title: Re: Sergey's New Board
Post by: Sergey on May 08, 2016, 02:05:03 PM

Helle TBK and everyone.

Maximum voltage is easy to determine when it comes to those small boards. If you see tree big transistors of the same size, it's 24 V. In cae there is one big transistor and smaller ones, it's 15 volts.